It is often a challenge to cut your hedges, especially in the spring season when you’re trying to get your hedges to look their best.
But the good news is that you don’t have to struggle with trying to get your hedges cut the right way. Whether you’re going to use a large chainsaw or a smaller manual cutting tool, you’ll need to find something that works for your use.
The effort that goes into cutting your hedges doesn’t have to be hard to follow. There are a few things that can be done to help you make the most out of your hedge cutting efforts.
Some of these points focus on helping you keep your hedge cut with the weather and other conditions in an area in mind.
Figure Out the Right Time
As important as it can be for you to cut your hedge in the spring, you have to ensure you get ready at the right time. You should trim early-flowering shrubs after they bloom. At this point, it will be easier for the hedge to be trimmed so it will continue to look beautiful in the spring.
Anything that flowers in the summer should be trimmed at the start of the spring as well. The trimming ensures that any dead spots around a hedge will be restored and will grow back in the summer season. This can also help you with keeping your hedge looking brilliant as the season starts.
You can also trim non-flowering hedges if you have noticed their growths are all the way formed. These hedges can be cleared off to allow for new ones to grow. Anything that has matured will not grow any further, thus resulting in the chance that some dead spots might come along on whatever you are trying to cover.
Check Your Equipment
You’ll need to ensure that the equipment you have on hand is capable of taking care of your cutting needs.
A chainsaw sharpener may help you with getting your chainsaw for cutting your hedges firm and strong, for instance. But even if you have one of the best chainsaw sharpeners around, you will have to ensure you get the chainsaw you use is ready for the task at hand and that everything is handled evenly and accordingly.
Keep a Tarp Ready
Get a tarp ready under your hedge before you start trimming. This is to help you collect the materials that you are cutting.
You’ll need to do this to ensure your lawn will not be hurt by the efforts involved with clearing off your hedge. Your lawn may be fragile during the spring season.
Look For Suckers
Suckers are small branches that you’ll find at the base part of the trunk. These are called suckers in that they will suck out the nutrients that your hedge needs.
Be sure to remove them at the start. Chainsaw sharpeners may help you with getting your cutting tools ready to cut through these difficult surfaces.
Allow For Growth By Cutting Further Back
It is recommended for you to cut a little further back on the hedge. When you trim small parts on your hedge, you are allowing the surface to grow along the cut. By going further back along the body of the hedge, you will encourage further growth along the limb. The work could help produce a dense design all around.
Review How Thick the Branches Are
A rule of thumb for cutting your hedge should entail looking at how thick the branches along your space are. The routine includes reviewing the branches based on what might be taking up the most nutrients in your layout.
It might be easier for chainsaw treated by the best chainsaw sharpeners to take care of thick branches.
Use a Guide
Cutting straight lines can be a challenge, especially if you’re trying to get several hedges in one row. You can use a guide to help you with getting the hedge cut evenly.
You can get a level guide like a small board along the side of your growths. The layout will help you to figure out the proper direction that you want to utilize for cutting.
The best type of guide to have is a string that you will work alongside. The work includes moving a trimming horizontally or vertically along the body of the line. The string guide should be arranged through the use of a small level to help you find a way to cut your hedge at the same length or height.
Be sure the guide you use will not go too far deep towards your cover. You cannot allow the excess weight to go over the materials that you are working with here.
Add a Rounded Top Depending on Precipitation
You can produce a rounded top on your hedge provided that you have a high amount of precipitation coming along during the spring. A rounded top ensures that intense rain will not pile up on your shrub. The moisture will flow off of the top instead and will be easier to support.
Trim the Upper Branches Shorter
This next point works best on newer shrubs that are starting to grow out. Cutting the upper branches shorter allows the lower branches to receive the sunlight that they require. It becomes easier for the branches to stay healthy and nourished when they are cut a little shorter than usual.
More importantly, the process ensures that the branches will look a little cleaner and well-maintained if handled accordingly.
The upper branches can be cut as short as needed, but you should ensure that the cuts are made carefully and with enough control in mind. Do not keep them too short to where they would be aligned next to the trunk or else it might not be easy for the branches to grow well enough.
Use a Firm and Sharp Cutting Tool
The last tip to follow involves looking at the specific cutting tool you will use. A chainsaw can work, but it has to be treated with care by one of the best chainsaw sharpeners to ensure the cutting teeth can go through the surfaces well enough.
A Final Note
The effort that you put into cutting your hedge this spring cannot be understated. You should review how well the hedge is handled and that you plan your space accordingly.
Your plan should help ensure that whatever you cut will look beautiful in time for the spring season. You will enjoy having a fine-looking hedge in your garden in time for the beautiful spring season.